INF-42
< Procedure 1 >
Write the 1394 UID numbers.
Regarding UID writing procedure, refer to item “6-3-2. Write UID data” (page INF-25)
Write the Serial Number.
With Serial Number Writing Procedure, please consult service department of
Professional AV Business unit.
Set the destination.
Regarding destination setting procedure, refer to item “6-3-1. Setting of destination” (page INF-24).
NOTE: For AG-HMC151E model, “Setting of destination” is not required.
Please operate following < Procedure 2 >
Replace the DIGITAL MAIN P.C.Board
To Next Page
Loading...
