Panasonic AG-UX90 - Using Operation Icons

- 100 -
∫ To display the Mode Information
Press and hold the DISP/MODE CHK button to display the mode information screen first. Each time
you press the button, the display mode of the screen switches in the following order:
Mode information display1 # Mode information display2 # Mode information display3 #
Mode information display4 # Mode information display5 # Normal display
You can use convenient functions just by the easy operation of touching the screen.
1 Touch the LCD monitor in the recording
screen.
≥ The operation icons are displayed.
2 Touch an operation icon.
≥ The following function is available. Refer to the respective
pages for the operation.
≥ If you touch the screen while an operation icon is being displayed or do not touch the icon for a
certain period, it will disappear. To display again, touch the screen.
Mode information display1: Displays the list of functions assigned to the USER buttons
(USER1 to 9).
Mode information display2: Displays the title given to each scene number of a scene file.
Mode information display3: Displays the settings assigned to the GAIN button ([GAIN L]/
[GAIN M]/[GAIN H]), the White Balance mode settings assigned
to the WHITE BAL button ([WHITE BAL A]/[WHITE BAL B]/
[WHITE BAL PRST]), and the setting status of the White
Balance modes [Ach] and [Bch] ([AWB A]/[AWB B]).
Mode information display4: Displays the settings for [REMOTE REC],
[REMOTE REC LINK], [HDMI TC OUTPUT], [CAMERA
NUMBER], [SUB REC BUTTON] and [SUB ZOOM].
Mode information display5: Displays the settings for [AUDIO LOW CUT CH1], [AUDIO LOW
CUT CH2], [AUDIO LEVEL CH1], [AUDIO LEVEL CH2],
[INPUT1 LINE LEVEL], [INPUT2 LINE LEVEL],
[INPUT1 MIC LEVEL] and [INPUT2 MIC LEVEL].
Recording
Using Operation Icons
, etc. Scene number of [FILE SELECT] (l 139)
, etc. USER Button Icon (l 79)
F1: F2: F3: F4: F5: F6:
ATW.L
MENU
DRS
PRE-REC
F1:
F2:
DRS
PRE-REC
AG-UX90EJ_DVQP1150ZA.book 100 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分