Panasonic AG-UX90 - Display Setting

- 169 -
Display setting
Different menu items are displayed depending on whether this unit is in Recording Mode or
Playback Mode.
All default settings are indicated with underlined text.
Selects the brightness level of the left-leaning zebra patterns on the screen.
1 Touch [ZEBRA DETECT 1].
≥ Touch [YES].
2 Touch / to adjust settings.
≥ You can select a value between 50% and 105%.
3 Touch [EXIT] to complete the setting.
≥ This function’s default setting is “80%”.
Selects the brightness level of the right-leaning zebra patterns on the screen.
1 Touch [ZEBRA DETECT 2].
≥ Touch [SET].
2 Touch / to adjust settings.
≥ You can select a value between 50% and 105%.
3 Touch [EXIT] to complete the setting.
≥ You can display [ZEBRA 2] after setting the level. (l 94, 157)
≥ This function’s default setting is “100%”.
Displaying of the luminance level display marker can be switched.
≥ Marker can be displayed when set to [ON]. (l 94, 157)
: [DISP SETUP] # desired setting
[ZEBRA DETECT 1]
[ZEBRA DETECT 2]
[SET]/[OFF]
[MARKER]
[ON]/[OFF]
MENU
AG-UX90EJ_DVQP1150ZA.book 169 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分