Panasonic AG-UX90 - Master Ped

- 143 -
Adjusts color density.
1 Touch [CHROMA LEVEL].
2 Touch / to adjust settings.
≥ You can select a value between s70 and r30.
3 Touch [EXIT] to exit the menu screen.
≥ The default setting that is assigned to [F1:] in [FILE SELECT] is “0”.
Adjusts color balance.
1 Touch [CHROMA PHASE].
2 Touch / to adjust settings.
≥ You can select a value between s31 and r31.
3 Touch [EXIT] to exit the menu screen.
≥ The default setting that is assigned to [F1:] in [FILE SELECT] is “0”.
Represents the color during the recording.
1 Touch [MATRIX].
2 Touch / to select the setting item.
3 Touch [EXIT] to exit the menu screen.
Adjustment of black level based on the image is performed.
1 Touch [MASTER PED].
2 Touch / to adjust the black level.
≥ You can select a value between s150 and r150.
3 Touch [EXIT] to exit the menu screen.
≥ The default setting that is assigned to [F1:] in [FILE SELECT] is “0”.
[CHROMA LEVEL]
[CHROMA PHASE]
[MATRIX]
[NORM1]: Suitable for recording in the open air or under a halogen lamp.
[NORM2]: Makes colors appear brighter than the [NORM1] mode does.
[FLUO]: Suitable for recording indoors under fluorescent lamp.
[CINE-LIKE]: Suitable for cinema-like image.
[STILL-LIKE]: Expresses colors in a picture tone similar to that produced with a digital
still camera.
[MASTER PED]
AG-UX90EJ_DVQP1150ZA.book 143 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分