Panasonic AG-UX90 - Page 150

- 150 -
If you set this item to [ON], you can compensate for and reduce flash band, a phenomenon that
creates markedly different levels of luminance between the top and bottom of the image when
recording is performed in an environment where another camera is firing its flash. (l 90)
This sets the camera number for this unit.
1 Touch [CAMERA NUMBER SET].
2 Touch / to change the Camera Number.
≥ Numbers between 0 and 16 can be set.
3 Touch [RETURN].
≥ Touch [EXIT] to exit the menu screen.
≥ This function’s default setting is “0”.
[FLASH BAND COMPENSATION]
[ON]/[OFF]
[CAMERA NUMBER SET]
AG-UX90EJ_DVQP1150ZA.book 150 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分