- 65 -
You can customize Auto Iris motion settings for various recording conditions by adjusting the
settings of [AUTO IRIS LEVEL] and [AUTO IRIS LEVEL EFFECT] individually.
∫ Adjusting brightness during the Auto Iris Mode
1 Select the [AUTO IRIS LEVEL EFFECT] menu.
2 Touch / to adjust settings.
≥ You can select a value between s50 and r50.
≥ Touch [EXIT].
3 Select the [AUTO IRIS LEVEL] menu.
≥ If you select [OFF], the [AUTO IRIS LEVEL EFFECT] setting will not be applied.
4 Touch [EXIT] to complete the setting.
≥ You can also change the [A.IRIS LEVEL] setting with a USER button. (l 94)
Utilizing the USER button
It is convenient to use following functions of the USER button when it is set to Iris adjustment.
≥ Please refer to page 79 for details about setting the USER button.
Customizing Auto Iris motion settings for various recording conditions
: [SCENE FILE] # [AUTO IRIS LEVEL EFFECT]
: [SCENE FILE] # [AUTO IRIS LEVEL] # [ON]
USER button function Effect
Backlight Compensation (l 82) Switches to automatic iris control to compensate the
backlight. This will brighten the image on the screen to
prevent getting dark when a backlight is hitting the subject
from the back.
Spotlight (l 83) Switches to automatic iris control for spotlight. This will allow
to clearly record an extremely bright subject.
MENU
MENU
AG-UX90EJ_DVQP1150ZA.book 65 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分
To Next Page
Loading...
