5. Cleaning Procedures
NOTE : Turns power off during cleaning.
Make sure the power is OFF before cleaning.
Use ethanol (more than 99% purity) as
cleaning liquid.
5-1 Cleaning of Head Chips : (Daily)
Clean heads by applying even pressure and rotating
cylinder a few times. Never wipe in up and down
motion. Never touch a cylinder by naked hand. First
wipe with a cloth soaked by cleaning liquid. Then
wipe with dry cloth.
5-2. Cleaning of Drum Lead : (Weekly)
Be careful not to touch a head chip. Clean the drum
lead with a pick.
5-3. Cleaning of A/C Head : (Weekly)
Wipe the A/C head with a cloth soaked by cleaning
liquid. Wipe again with a dry cloth.
5-4. Cleaning of Pinch Roller and
Capstan : (Weekly)
Wipe the Pinch Roller and Capstan with a cloth
soaked by cleaning liquid.
5-5. Cleaning of Post : (Weekly)
Wind a cloth on a pick. Wipe each post dry with that
pick . Wipe again with a dry cloth. For metal posts
wipe with cleaning liquid. Then wipe dry again.
NOTE:
Use the clean cloth for cleaning purpose. Do not use
any dirty cloth.
The Cleaning Cloth can be ordered as spare part.
The part number indicated as below.
CLEANING CLOTH : VZZ0095
To Next Page
Loading...
