2-2
2. Table of Test Point
2-1. AJ-D440, AJ-D450, AJ-D640, AJ-D650, AJ-D750, AJ-D850
<Table of Test Point>
Correspondence Model
Name AJ-D750, AJ-D850 AJ-D440, AJ-D450, AJ-D640, AJ-D650
[ Tension Arm Adjustment ]
TENSION SERVO (F1) : TP201 ß
TENSION OFFSET MECHA I/F : VR1 ß
TENSION GAIN MECHA I/F : VR2 ß
[ Photo Sensor Voltage Adjustment ]
S-side Output SYSCON (F2) : P2 – 25PIN ß
T-side Output SYSCON (F2) : P2 – 26PIN ß
Adjustment Point MECHA I/F : SW200 ß
[ Tape Pass, A/C Head Adjustment ]
R/P-ENV RF (H4) : TP16 ß
PB/ENV RF (H4) : TP15 ß
R/P-HSW SERVO (F1) : TP233 ß
PB-HSW SERVO (F1) : TP232 ß
LIVE-CTL SERVO (F1) : TP30 ß
CUE CUE (H2) : TP101 ADDA-CUE (F8) : TP381
[ LISTA Adjustment ]
ATF ERR SERVO (F1) : TP321 ß
TRG R/P HSW SERVO (F1) : TP233 ß
PB HSW SERVO (F1) : TP232 ß
GND SERVO (F1) : TG510 ß
ATF GAIN Select the EVR on the Service Menu.
(Refer to below table
<LISTA Adjustment Mode>)
ß
<A/C Head Adjustment Mode>
Adjustment Name Adjustment Mode (Select on the Service Menu)
Azimuth, X value Adj. Select the item “A07 : RP LINEAR P”.
<LISTA Adjustment Mode>
Adjustment Mode
Adjustment Name Service Menu Item TRG Connection
Sens. Adjustment R/P Head “A06 : RP GAIN P” R/P HSW
Sens. Adjustment PB Head “A04 : PB GAIN P” PB HSW
Sens. Adjustment R/P Head (DV) “A08 : RP GAIN” R/P HSW
Linearity Adjustment “A07 : RP LINEAR P” R/P HSW
To Next Page
Loading...
