Panasonic AJ-D230H - Page 50

2-33
(Classified list of CTL Recording Level)
TYPE Model
A AJ-D440, AJ-D450, AJ-D640, AJ-D650,
AJ-D750, AJ-D850
B AJ-D200, AJ-D210, AJ-D215, AJ-D400,
AJ-D700, AJ-D700A, AJ-D800, AJ-
D800A,
AJ-D810, AJ-D810A, AJ-D610
C AJ-D220, AJ-D230, AJ-D230H, AJ-D250,
AJ-LT75, AJ-LT85
D AJ-DE77, AJ-D780
E AJ-D940, AJ-D950, AJ-D950A
F AJ-D90, AJ-D900W, AJ-D900WA,
AJ-D910WA, AJ-PD900W, AJ-PD900WA
G AJ-D92, AJ-D94, AJ-D95DC
(Specification for confirmation)
TYPE
CTL Output Level : C1, C2
PLAY (Please refer to Table 1)
A, D, E
C1, C2 ≥ 1.8 V
B, F
C1, C2 ≥ 220 mV
C, G
C1, C2 ≥ 160 mV
REV (1) (-1 speed on SHTL mode)
A, D, E
C1, C2 ≥ 1.4 V
B, F
C1, C2 ≥ 170 mV
C, G
C1, C2 ≥ 120 mV
REV (2) (-0.2 speed on SHTL mode)
A, D, E
C1, C2 ≥ 1.2 V
B, F
----------
C, G
----------
< PLAY mode on VTR>
TYPE
Mode
A, B, C
PLAY
D
FWD +1.0 (SHTL) or PLAY
E, F, G
PLAY on 25M mode
1. Please confirm that the each screws are fixed on
A/C Head.
2. Place Unit into REC mode and playback the
recorded portion.
3. Confirm that the CTL level is within specification
on PLAY and REV mode.
4. If CTL level is out of specification on PLAY
mode, confirm the height of A/C Head (refer to
item “A/C Head Height Confirmation”)
5. If CTL level is out of specification on REV mode,
confirm the height of T4 Post (refer to item “REV
Tape Pass Confirmation and Adjustment”).