2-44
8. Next, select the Serial number of the Alignment tape on the screen. In case of LISTA software have not
resisted data of alignment tape, press the ESC key, then main menu is display on the screen. And select the
item “<4> Alignment Tape” for entry the data on the attachment sheet, which is enclosed of alignment tape.
9. In case of LISTA software have resisted data of alignment tape, select the serial number of Alignment tape,
then appear message “ok?(y/n)” on the screen. And press “ Y ” or “ ENTER ” key, then LISTA main menu is
display on screen.
<< In case of Alignment Tape resisted already >> << In case of Alignment Tape does not resisted >>
To Next Page
Loading...
