Operating Instructions
105
3. Click [Save] when finished.
• The new settings are saved.
• When finished, "Success!" is displayed.
4. Click [Go to Image Display page].
• The Image Display page is displayed.
Banner Display When checked to [Enable], the setting will be enabled.
When unchecked, the setting will be disabled.
Note
• When the Banner Display is enabled, the camera
accesses the Image URL every time the Single
Camera page is displayed. The intermittent and
continuous switching of the Single page burdens
the PC that stores the image linked with the URL.
• If the image URL linked with an image stored in a
PC that requires an authentication is set, the
authentication window will be displayed when
displaying the Single page.
• Banner user • All users : The banner can be displayed for
all users.
Administrator only : The banner can be displayed for
the administrator only.
General user only : The banner can be displayed for
the general users only.
• Image URL
*1
• Enter the image URL you want to display as a banner.
When [Enable] is checked, enter the image URL. (1—
127 characters)
• Link URL
*1
• Enter the target URL you want to display when clicking
the banner. (0—127 characters)
*1
Note that [Space], ["], ['], [&], [<], and [>] are not available.
Setting Description
To Next Page
Loading...
Need help?
General
