Operating Instructions
24
1 Camera Monitoring
1.1 Accessing the Camera
1. Start up the web browser on your PC.
2. Enter "http://IP Address (or URL):Port Number" on the address bar, and
press [Enter] on the keyboard.
• When the port number is 80 (default), you do not need to include the port
number in the address. See page
47 for details about the port number.
• If the camera image is not displayed, see page 9 and page 10 of
Troubleshooting on the CD-ROM.
3. The Enter Network Password window is displayed. Enter the user name and
password that you set previously, and click [OK].
Note
When [Permit access from guest users] is set on the Security: Administrator
page (see page
66), the authentication window will not be displayed.
E.g. http://192.168.0.253:50000
http:// .viewnetcam.com:50000
To Next Page
Loading...
Need help?
General
