Operating Instructions
110
5.4 Changing the Indicator Display
The Indicator Control page allows you to select an operation for the indicator. There
are three options.
• Turn indicator on when camera is on.
• Turn indicator on during camera access.
• Never turn indicator on.
1. Click [Indicator Control] on the Setup page.
2. Select an option.
• Clicking [Cancel] cancels your settings without saving changes.
Note
• See page 19 for the Indicator Display table.
• Selecting [Never turn indicator on] keeps indicator always off.
3. Click [Save] when finished.
• The new settings are saved.
• When finished, "Success!" is displayed.
4. Click [Go to Indicator Control page].
• The Indicator Control page is displayed.
Setting Description
Turn indicator
on when camera
is on.
• The indicator always turns on or blinks (see page 19).
Turn indicator
on during
camera access.
• The indicator turns green when the camera is being
accessed.
Never turn
indicator on.
• The indicator always turns off.
To Next Page
Loading...
Need help?
General
