Operating Instructions
114
6.1.6 Updating the Camera Firmware
The Update Firmware page allows you to update the camera's firmware. If new
firmware is available, install it into the camera.
Note
• Do not turn off the power during a firmware update.
• All buffered images and sensor logs on the internal memory will be
deleted after the firmware update.
• The firmware version is displayed on the Top page and the Status page.
1. Download the new firmware from the Panasonic Network Camera support
website at http://panasonic.co.jp/pcc/products/en/netwkcam/, and save it
on your PC.
2. Click [Update Firmware] on the Maintenance page.
3. Click [Update Firmware].
• The procedure can take up to 8 minutes.
• The camera restarts. Restart operation takes up to 90 seconds.
To Next Page
Loading...
Need help?
General
