Operating Instructions
113
6.1.4 Confirming Sensor Logs
Displays up to 50 Sensor Logs in chronological order. Old logs will be overwritten
by new ones.
1. Click [Sensor Log] on the Maintenance page.
2. Sensor Logs are displayed.
Note
If the camera is restarted, all sensor logs are deleted.
6.1.5 Restarting the Camera
It is possible to restart the camera by disconnecting the AC adaptor from the power
outlet and reconnecting it again. The camera can also be restarted on the Restart
page.
Note
When the camera is restarted, the buffered images and sensor logs will be
deleted.
1. Click [Restart] on the Maintenance page.
2. Click [Restart].
• Restarting takes about 90 seconds. The Top page is displayed when
finished.
Item Description
New Sensor Logs • Displays the number of new sensor logs.
Date • Displays the date and time when the Motion Detection is
activated.
Sensor Type • Displays the Trigger Setting (Motion Detection) on the
Trigger page.
To Next Page
Loading...
Need help?
General
