Operating Instructions
64
2.7 Changing Camera Settings
The Camera page allows you to set the camera name, white balance, AC power
source frequency and color night view.
1. Click [Camera] on the Setup page.
2. Set each parameter.
• Clicking [Cancel] cancels your settings without saving changes.
Setting Description
Camera Name
• The camera name is displayed on the Single Camera page.
• Enter ASCII characters (see page 145) or characters from
other languages (1—15 characters for a 1-byte character
and 1—7 characters for a 2-byte character). Note that
[Space], ["], ['], [&], [<], and [>] are not available.
To Next Page
Loading...
Need help?
General
