156
3 Disengage the tabs on the outer front panel (3 locations on the left side and 1 location on the right side).
Remove the outer front panel while pulling it slightly up.
18.3.2 Removing the Electrical Component Covers (2 & 3-way valve Cover and Terminal
Plate Cover)
1 Remove the screw (1 piece) of the electrical component cover (2 & 3-way valve cover). Slide the electrical
component cover (2 & 3-way valve cover) downward to remove it.
2 Remove the screws (2 pieces) and disengage the tabs (2 locations) of the electrical component cover
(terminal plate cover). Then, remove the electrical component cover (terminal plate cover).
To Next Page
Loading...
