75
14.13 ODOR CLEANUP
Purpose
o This operation is to release odor from indoor unit.
Control condition (During Stand by mode)
o Press ODOR CLEANUP button for 3 seconds or more.
o The operation activates for 20 minutes and resume to the presetting operation automatically.
o The unit will be stop after 20 minutes of ODOR CLEANUP function. (Blast --> Heating --> Blast).
o Air flow amount is adjusted automatically and the air flow direction is upward.
Press 3 seconds
20 minutes
later
ODOR
CLEANUP
Press 3 seconds
20 minutes
later
ODOR
CLEANUP
* No odor cleanup when stopped in half way.
o OFF timer: ODOR CLEANUP continues display and the operation stopped after odor removal end.
o SLEEP timer: ODOR CLEANUP immediately stop and OFF "ODOR CLEANUP" display.
Note:
o When pressing "ODOR CLEANUP" for 3 seconds during operation, the unit gets back to normal operation
after 20 minutes of ODOR CLEANUP operation.
o During odor clean operation, please open windows to circulate the room air because the room temperature
and humidity will rise followed by odor inside the room.
o If the odor persists after the odor cleanup operation, please consult service dealers for unit washing and
service.
To Next Page
Loading...
