What to do if my Panasonic DVR has no power and switches to standby?
- Jjulian09Jul 30, 2025
If your Panasonic DVR unit is on but cannot be operated and switches to standby automatically, try the following: * Ensure the AC power supply cord is securely inserted into the household AC outlet. * If “U14” appears on the display because the unit is hot, wait for it to disappear. * Reset the unit: first, switch the unit to standby by pressing [Í/I] on the main unit (press and hold for about 10 seconds if needed). If this doesn't work, disconnect the AC power supply cord, wait one minute, and then reconnect it. Then, press [Í/I] to turn the unit on.