Panasonic DP-C405

320
DP-C405/C305/C265
FEB 2008Ver. 1.1
3.5. Error Codes (For Copier)
The self-diagnostic functions detect malfunctions in the important components of the copier.
When any malfunction occurs, the copier stops, and displays a relevant error message on the Panel
Display.
3.5.1. User Error Codes (U Code)
Note:
Uxx, and a message will appear on the Panel Display.
User Error Codes (U Code) Table
Code Item Check Points
U0 Coin/Card Vender 1. Lacks a charge.
2. Vending Machine is not connected.
3. EC PCB is defective.
U1 Close Front Cover 1. Front Cover is open.
2. Front Cover Sensor is disconnected.
3. Front Cover Sensor is defective
4. LVPS connector is disconnected.
5. LVPS is defective.
6. EC PCB connector is disconnected.
7. EC PCB is defective.
U4 Close Finisher 1. Finisher is open.
2. Paper is in the output bin.
3. Stapler is empty.
4. LVPS connector is disconnected.
5. LVPS is defective.
6. EC PCB connector is disconnected.
7. EC PCB is defective.
U6 Close Right Cover
(Right Side Cover/Feed Cover1/ADU
Cover)
1. Right Cover is open.
2. Right Cover Sensor is disconnected.
3. Right Cover Sensor is defective.
4. LVPS connector is disconnected.
5. LVPS is defective.
6. EC PCB connector is disconnected.
7. EC PCB is defective.