Panasonic DP-C405

450
DP-C405/C305/C265
FEB 2008Ver. 1.1
4.2.4.5. Protocol Trace
Print a Protocol Trace Report for the previous communication.
Set the machine to Service Mode, and press the “9” key on the Control Panel.
↓
Press the “Start” key to enter the F9 Service Mode on the Control Panel.
↓
Select “00 Fax Service Mode” on the Touch Panel display.
↓
Select “03 Print Parameter List / Report” on the Touch Panel display.
↓
Scroll the menu with the “” button on the Touch Panel display, and select “06 Protocol Trace”.
↓
Select the “Close” button three time on the Touch Panel display.
↓
Press the “Function”, and the “C (Clear)” keys simultaneously on the Control Panel to exit the Service
Mode.
*************** Protocol Log Report ****************** Date MMM-dd-yyyy ***** Time 16:56 *******
Status : OK
Mode : ECM-TX (Fine)
Speed : 33600bps 0MS/L (3429sr)
Remote Capa. : NSF 00 00 79 00 00 00 16 00 09 13
DIS 20 C2 FA C4 80 95 80 80 80 A0
Local Capa. : NSS 00 00 79 00 00 00 02 00 01 00
00 10 00 02 84 81 90 80 80 10
10 18 00 1A 95 C1 D0 80 90 D1
80 80 80 01
8B 05
Remote : NSF DIS CFR MCF
Command Log.
Local : NSS PIX PPS-EOP DCN
Remote :
Local :
------------------------------------------------------------------
Remote :
Local :
------------------------------------------------------------------
------------------------------------------------------------------
Remote :
Local :
------------------------------------------------------------------
***** DP-xxxx ********************** - - ***** - - *********
- -