426
DP-C405/C305/C265
FEB 2008Ver. 1.1
02 Maintenance
Count (1/2)
90 Drum Extra Count Y OPC Drum Unit Counter.
91 Drum Extra Count M
92 Drum Extra Count C
93 Drum Extra Count BK
94 Belt Extra Count Transfer Belt Unit Counter.
95 Img. Area Page Count Y
(Factory use only)
96 Img. Area Page Count M
97 Img. Area Page Count C
98 Img. Area Page Count BK
99 Not Used
100 Img. Area Dot Count Y
(Factory use only)
101 Img. Area Dot Count M
102 Img. Area Dot Count C
103 Img. Area Dot Count BK
104 Not Used
Maintenance
Count (2/2)
(DP-C405/
C354 Series
Only)
105 APIC Add Toner Count Y 1/3 supply ----- count 1
2/3 supply ----- count 2
All supply ----- count 3
Counter clear after executing APIC
(Factory use only)
106 APIC Add Toner Count M
107 APIC Add Toner Count C
108 APIC Add Toner Count BK
109 Not Used
110 TDC Recovery Count Y Every TDC recovery count 1
Counter reset when executing F8-09 or F8-11.
(Factory use only)
111 TDC Recovery Count M
112 TDC Recovery Count C
113 TDC Recovery Count BK
114 Not Used
03 Paper Feed
Count (1/2)
00 Bypass Tray Count Total sheets of paper fed from the Sheet Bypass
counter.
01 1st Paper Tray Count Total sheets of paper fed from the Tray 1
counter.
02 2nd Paper Tray Count Total sheets of paper fed from the Tray 2
counter.
03 3rd Paper Tray Count Total sheets of paper fed from the Tray 3
counter.
04 4th Paper Tray Count Total sheets of paper fed from the Tray 4
counter.
05 Not Used
06 2-Sided Count 2-sided Total Prints Counter.
07 A4/8.5 x 11 Count A4 / Letter Total Prints Counter.
08 A4-R/8.5 x 11-R Count A4-R / Letter-R Total Prints Counter.
09 A3/11 x 17 Count A3 / Ledger Total Prints Counter.
10 B4 / LEGAL Count B4 / Legal Total Prints Counter.
F7 Mode
No. Item Function Remarks