Panasonic DP-C405

431
DP-C405/C305/C265
FEB 2008Ver. 1.1
4.1.9. F9 Mode: Unit Maintenance
Set the machine to Service Mode, and press the “9” key on the Control Panel.
↓
Press the “Start” key to enter the F9 Service Mode on the Control Panel.
↓
Select the desired code number on the Touch Panel display.
↓
If you wish to select another function, select the Tab key on the Touch Panel display, or scroll the menu
with the “”, “” buttons.
↓
Select the desired function on the Touch Panel display, and then select the “OK” button.
↓
Select the “Close” button twice on the Touch Panel display.
↓
Press the “Function”, and the “C (Clear)” keys simultaneously on the Control Panel to exit the Service
Mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s). (Turn the Power Switch on
the Left Side of the machine to the OFF then back to the ON position.)
F9 Mode
Service
Mode
Item Remarks
F9 Unit
Maintenance
00 Fax Service Mode
01 Service Alert Tel # Displays the contact number when a
machine malfunction occurs.
02 Firmware
Version
00 SC Displays the firmware version for SC.
01 SC Boot Displays the firmware version for SC
Boot.
02 PNL Displays the firmware version for PNL.
03 EC Displays the firmware version for EC.
04 SCN Displays the firmware version for SCN.
05 Finisher Displays the firmware version for
Finisher.
06 FCB Displays the firmware version for FCB.
07
-11
Not Used
12 Data Security Kit
(DP-C405/C354
Series Only)
Displays the firmware version for Data
Security Kit.