Panasonic DP-C405

63
FEB 2008Ver. 1.1
DP-C405/C305/C265
Note:
1. Clean all Rollers and Separation Rubber with a soft cloth saturated with water.
For stubborn toner accumulation, wipe with a soft cloth saturated with Isopropyl Alcohol first, then
follow up with a soft cloth saturated with water.
2. The Maintenance Cycle is based on the Counter Information for each individual module.
To verify the counter information, print the Total Counter List using the Service Mode: F7 - Electronic
Counter - 00 (List Print).
3. Cleaning, Replacement, and Adjustment Cycle (Sheet) are based on using Panasonic's recommended
standard paper and supplies. Ratio: Color vs. Black = 2 : 8, LT/A4, 1-Sided, 4 pages/job. These cycles
may vary with the kind of paper used, Paper size, orientation, print duty, continuous/interval print and/
or ambient conditions.
-Y (Yellow)
5445
- - 480K
Refer to
Sect 2.2.11.
of the Sevice
Manual
F7-02-40-43
Deve. Unit
Count
- M (Magenta) - - 480K
- C (Cyan) - - 480K
- BK (Black) - - 480K
Main Paper Feed Module
42 Registration Roller 2112 120K
Water
1
-
Refer to
Sect 2.2.13.
of the Sevice
Manual
43
Upper Intermediate
Roller
1834 120K
Water
1
-
44
Lower Intermediate
Roller
1835 120K
Water
1
-
Paper Feed Module
45
Paper Feed Roller
(1st/2nd/3rd/4th)
1922 120K
Water
1
240K
Refer to
Sect 2.2.14.
of the Sevice
Manual
F7-03
1st/2nd/3rd/4th
Paper Tray
Count
46
DFP Roller
(1st/2nd/3rd/4th)
1911 120K
Water
1
240K
47
Pickup Roller
(1st/2nd/3rd/4th)
1926 120K
Water
1
240K
48
Intermediate Roller
(3rd/4th)
6801 120K
Water
1
-
Sheet Bypass
49 Paper Feed Roller 3003 120K
Water
1
240K
Refer to
Sect 2.2.9.
of the Sevice
Manual
F7-03
Sheet Bypass
Count
50 Pickup Roller F 3005 120K
Water
1
240K
51 DFP Roller 3111 120K
Water
1
240K
52 Pickup Roller R 3012 120K
Water
1
240K
LSU
53 LSU Aperture Glass -
When
Toner
Waste
Container
is
Replaced
Aperture
Cleaning
Tool
-- -
720K PM Kit (See Note)
No. Mechanical Parts Ref. No.
Cleaning
Replacement/
Adjustment
Ref. Counter
Cycle
(Sheets)
Method
Cycle
(Sheets)
Procedure