5 Press MCN or MDN repeatedly to select the edge you
want to set the margin for from “TOP”, “RIGHT”,
“LEFT” or “BOTTOM”. A MSETN
6 Enter the desired margin width using the dial keypad.
A MSETN
7 If necessary, enter the number of documents (up to
99). A MxN
8 After you finish copying, press MwN to reset this
feature.
Note:
R To automatically reduce the copies according to the
set margin, see feature #474 on page 83.
R This feature cannot be used when your original
document size or the recording paper size is set to
A6.
R This feature and page layout features cannot be used
at the same time.
R You can hold the previous margin setting (feature
#475 on page 83).
7.2.10 Copy reservation
You can make a copy reservation under the following
conditions:
– while the unit is printing documents from your
computer.
– while the unit is printing received fax documents.
1 Set the original (page 35).
2 While “PC PRINTING” or “PRINTING” is displayed,
switch to copy mode by pressing MCOPYN (page 21).
3 Make necessary settings such as number of copies,
resolution, zoom features and page layout features.
A MxN
R “COPY RESERVED” will be displayed. The unit
will start copying after the current printing job has
finished.
52
7. Copier
To Next Page
Loading...
