Panasonic DP-MB251CX

Note:
R If you forget the password in step 3, delete all print
jobs using your computer, assign a new password,
then start printing again.
13.8 Proof Print
When printing multiple copies of a document, this feature
allows you to print only the first copy to check the print
result. If the first copy is printed correctly, you can then
continue to print the remaining document.
Note:
R This feature is not available when using the PCL or
PS printer driver.
1 Open the document you want to print.
2 Select [Print] from the menu.
3 Select the unit’s name as the active printer.
4 Click [Preferences], then click the [Job Type] tab.
5 Select [Proof Print].
R You can enter a desired job name in [Job
Name], up to 15 characters. If not entered, the
application itself will assign the job a name.
6 Click [OK].
7 Click [Print].
R The unit will print 1 copy of the document and stop
temporarily so you can check whether it was
printed as you expected.
R The print job manager icon is displayed in the task
tray. Click this icon to start the application that can
manage printing jobs.
To print the remaining documents from the unit
1. Press MEN repeatedly to display “PROOF PRINT”.
A MSETN
2. Press MCN or MDN repeatedly to select the desired
computer’s name. A MSETN
3. Press MCN or MDN repeatedly to select the desired
printer job.
R If your computer is not active, jobs are not
displayed.
4. Press MxN to continue printing.
R To cancel printing, press MBN A MSETN, and
then start again from the beginning.
13.9 USB Memory device
You can print files stored on a USB memory device and
save files to a USB memory device.
Note:
R A mass storage class USB memory device (Format:
FAT12/FAT16/FAT32, sector size: 512 bytes) can be
used with this unit.
R The following types of USB memory devices cannot
be used:
– NTFS formatted devices
– Multiple-LUN (Logical Unit Number) USB flash
memory device
– Multiple-partition USB flash memory device
– devices with a security/encryption feature
– devices with a built-in USB hub feature
Even if your USB memory is not these types, it may
not work with this unit.
R If the USB flash memory device is connected via a
USB hub, the USB flash memory device will not be
recognised. Do not connect via a USB hub.
R To re-connect a USB memory device, make sure to
fully remove the USB memory device before
connecting it again.
R Up to approximately 10 MB of free space may be
required for each scanned page.
R To assure continued emission limit compliance:
– use only USB memory that complies with EMC
standards (Example: CE, FCC)
File folder in a USB memory device
When you save files into the USB memory device, the
following folder is made on the USB memory device.
USB:/(Unit name)/IMAGE/XXXXXXXX
(“XXXXXXXX” is the last 8 digits of the MAC address.)
Important:
R Do not remove the USB memory device or turn
the power switch off while reading or writing data.
This could damage the unit or corrupt the file.
R Be sure to make a backup copy of the data.
R We are not responsible for any damages incurred
to your USB memory device resulting from
corrupted, or lost data.
R When disposing or giving away the USB memory
device, we recommend to erase the stored data.
The data that is stored on a USB memory device
is the sole responsibility of you, the customer.
13.10 Handset unit (DP-MB251CX
only)
Important:
R Before installing or removing the handset unit, be
sure to turn the power switch OFF.
104
13. Useful Information