Panasonic DP-MB251CX

R The LED blinks while connecting. When the
connection is complete, the LED stops blinking
and turns on.
3.7.4 Setting up using Windows
®
Installer
If you use a Windows computer, it is possible to configure
wireless LAN settings during the installation of
Multi-Function Station. For details, see “3.9 Installing
software (including printer, scanner and other drivers)”
(page 25).
3.8 Required computer
environment
Important:
R
When using Windows Server
®
2008/Windows
Server 2012, only the printer driver can be
supported. Install the printer driver using the Add
Printer feature of Windows.
R With Mac OS X, only the printer driver, scanner
driver (TWAIN/ICA) and PC fax (transmission) are
supported. See the setup guide for Mac OS X for
details.
To use Multi-Function Station on your computer, the
following are required:
Operating System:
Windows XP/Windows Vista/Windows 7/Windows 8
CPU:
Complies with Operating System recommendations
RAM:
Complies with Operating System recommendations
Other Hardware:
CD-ROM drive
Hard disk drive with at least 600 MB of available space
Web browser (recommendation):
Windows Internet Explorer
®
8/9
Windows Internet Explorer 10/11 (with compatible mode
recommended)
3.9 Installing software (including
printer, scanner and other
drivers)
Panasonic Multi-Function Station software enables the
unit to carry out the following functions:
– Printing on plain paper, thin and thick paper, labels,
envelope and Japan postcard
– Displaying the preview of the print image, changing
the page order, deleting pages, and changing the
print layout etc. before printing (Easy Print Utility)
– Scanning documents and converting an image into
text with OCR software
– Scanning from other applications for Microsoft
®
Windows that support TWAIN scanning and WIA
scanning (USB connection only)
–
Storing, editing or erasing items in the address book
using your computer
– Programming the features using your computer
– Assigning a password and printing confidential or
sensitive documents (Secure Print)
– Printing only the first copy to check the printing result
(Proof Print)
– Sending, receiving fax documents using your
computer
R Install Multi-Function Station (CD-ROM) before
connecting the unit to a computer with the USB
cable. If the unit is connected to a computer with
the USB cable before installing Multi-Function
Station, the [Driver Software Installation]
dialogue box may appear. If this dialogue box
appears, click [Close].
R Software features and appearance are subject to
change without notice.
R If you are also using KX-MB200/KX-MB700/
KX-FLB880 series, see page 126.
3.9.1 Preparing your computer and CD-ROM
1 Start Windows and exit all other applications.
R You must be logged in as an administrator in
order to install Multi-Function Station.
2 Insert the supplied CD-ROM into your CD-ROM
drive.
R If the [Select Language] dialogue box appears,
select the language that you want to use with this
software. Click [OK].
R If the installation does not start automatically:
Click [Start] A [All Programs] A
[Accessories]. Choose [Run]. Type “D:\Install”
(where “D” is the drive letter of your CD-ROM
drive). Click [OK].
(If you are not sure what the drive letter is for your
CD-ROM drive, use Windows Explorer and look
for the CD-ROM drive.)
3 Select your connection.
R For USB connection/wired LAN connection, refer
to “3.9.2 USB connection/LAN connection”,
page 25.
R For wireless LAN connection, refer to
“3.9.3 Wireless LAN connection”, page 26.
3.9.2 USB connection/LAN connection
1 [Easy Installation]
R The installation will start automatically.
2 When the setup program starts, follow the on-screen
instructions.
R Easy Print Utility (page 39) and Device Monitor
(page 100) will also be installed.
25
3. Preparation