1 Connect the handset cord (A).
2 Insert the handset connector (A), tab (B), and rib
(C).
R Remove the seal from the handset unit
connection jack if attached.
Caution:
R When moving the unit, be sure to hold by the grip.
Do not hold by the handset unit.
Correct
Incorrect
Note:
R While talking to the other party, you can send a fax
using the scanner glass by pressing MxN, and then
M1N (To receive a fax, press M2N).
To remove the handset unit
1. Pull the handset unit slightly forward (A), then lift it
in the direction of the arrow (B) to remove the rib.
2. Remove the tab (A), then disconnect the handset
connector (B).
13.11 Making a phone call using
the address book or one-touch
dial feature (DP-MB251CX only)
Before using this feature, store the desired names and
telephone numbers in the address book and one-touch
dial feature (page 55).
R Make sure that the MFAXN light is ON.
13.11.1 Using the address book
1 Press MWN.
R Confirm that there are no documents in the
document entrance.
2 Press MCN or MDN repeatedly to display the desired
item.
3 Press MMONITORN or lift the handset.
R The unit will start dialling automatically.
Note:
R For details about searching for a name by initial, see
page 54.
R If the LDAP setting is activated beforehand
(page 95), select “LDAP SEARCH” or
“ADDRESSBOOK” by pressing MCN or MDN. A MSETN
For LDAP search, enter the name using the dial
keypad (up to 11 characters), then press MSETN to
start searching.
105
13. Useful Information
To Next Page
Loading...
