R If you select “FINE”, “SUPER FINE” or “PHOTO”
resolution, the number of pages that the unit can
send will decrease.
R If the document exceeds the memory capacity,
sending will be cancelled.
R If a party is busy or does not answer, it will be skipped
and redialled later 2 or more times.
R After transmission, the unit will automatically print a
report (broadcast sending report).
9.3 Selecting the way to use your
unit
Depending on your situation, you can select the way you
prefer to use your unit.
– Use only as a fax (FAX ONLY mode).
– Use mostly as a telephone (TEL mode).
– Use as a telephone and/or fax (TEL/FAX mode).
– Use with an answering machine.
9.3.1 Use only as a fax (FAX ONLY mode)
Your situation
You have a separate telephone line just for faxes, or you
want to use the unit only for receiving faxes.
Setup
Set the unit to FAX ONLY mode (page 60) by pressing
MFAX AUTO ANSWERN repeatedly.
R The MFAX AUTO ANSWERN light turns ON.
Note:
R Received fax documents can be transferred
automatically to desired email address. To use the
email transfer feature, set the email destination
beforehand (page 98).
How faxes are received
All incoming calls will be answered as faxes.
9.3.2 Use mostly as a telephone (TEL mode)
Your situation
You want to answer calls by yourself. If a fax call is
received, you must receive the fax manually.
Setup
Set the unit to TEL mode (page 61) by pressing MFAX
AUTO ANSWERN repeatedly.
R The MFAX AUTO ANSWERN light turns OFF.
Note:
R Make sure feature #404 is set to “TEL” beforehand
(page 78).
How to receive phone calls and faxes
You have to answer all calls manually.
To receive a fax document, press MxN and then M2N.
59
9. Fax
To Next Page
Loading...
