EYFR03 User Manual 86 of 110 v1.6.0
Chapter 7: EtherNet/IPTM 20 January 2020
Number of results required for a batch in the parameter.
Unit used for torque fields
Torque of the tightening just performed.
Angle of the tightening just performed.
Padding byte for devices requiring even connection point sizes and max
VIN length.
Total size: 31-132 bytes
112
ID number of the last tightening
Timestamp of the last tightening
Sequence number of the running multi-parameter operation.
Instance number of multi-parameter operation (job or group) currently
running. Ignored if 0.
Type of multi-parameter operation currently running:
1 – Group
2 – Job
Ignored if Multi-Number is 0.
Number of the parameter that produced the tightening
Indicates if the last tightening was accepted as valid.
Number of results performed in the current batch for the parameter.
Number of results required for a batch in the parameter.
ID number of the last tightening
Timestamp of the last tightening
Indicates if the last tightening was accepted as valid.
Padding byte for devices requiring even connection point sizes.
Total size: 11-12 bytes
Input Connection Points for Current Qualifier Status
The connection points in this group provide a view of the current qualifier status and do not
provide any information about tightenings.
120
Status of up to 16 parameters currently running.
Parameter number (0 means parameter not running.)
Number of results performed in the current batch for the parameter.
Number of results required for a batch in the parameter.
Number of multi-parameter operation (job or group) currently running.
Ignored if 0.
Type of multi-parameter operation currently running:
1 – Group
To Next Page
