Panasonic FPG Series User Manual

Pulser Input Operation FP∑ Positioning Unit
11-12
11.6 Types of Manual Pulse Generators That Can be Used
A pulse generators should be used for which the number of output pulses is “25P/R” (25 pulses
per cycle).
With the “100P/R” (100 pulses per cycle) type, four pulses are output per click, and operation may not be
accurate in some cases.
A line driver output type is recommended.
A transistor open collector output type or transistor output type with pull-up resistance may be used.
For detailed information about connection methods →section 3.7

Panasonic FPG Series Specifications

General

High-speed counter	Up to 100 kHz
Input Voltage	24 V DC
Dimensions	Varies by model
Weight	Varies by model
Program Capacity	32 k steps
Programming Language	Ladder Logic
Communication	RS232C, RS485, Ethernet
Pulse output	100 kHz
Operating Temperature	0 to 55 °C
Supply Voltage	24V DC or 100-240V AC
Output Type	Relay, Transistor
Storage Temperature	-20 to 70 °C
Humidity	5 to 95% RH (non-condensing)