Panasonic FPG Series User Manual

FP2 Positioning Unit Deceleration Stop and Forced Stop
12-3
12.1 Sample Program
12.1.1 In - progress Stopping, Emergency Stopping
Program
Precautions concerning the program
-The number of the stop input flag varies depending on the number of axes that the unit has, and the
position in which it is mounted.
-If a deceleration stop or forced stop is triggered, the start flag for the various operations
must be turned OFF before operation can be restarted. This content is common to E point control, P
point control, home return, JOG operation, JOG positioning operation and pulser input operation.

Panasonic FPG Series Specifications

General

High-speed counter	Up to 100 kHz
Input Voltage	24 V DC
Dimensions	Varies by model
Weight	Varies by model
Program Capacity	32 k steps
Programming Language	Ladder Logic
Communication	RS232C, RS485, Ethernet
Pulse output	100 kHz
Operating Temperature	0 to 55 °C
Supply Voltage	24V DC or 100-240V AC
Output Type	Relay, Transistor
Storage Temperature	-20 to 70 °C
Humidity	5 to 95% RH (non-condensing)