OPERATING INSTRUCTIONS
Issue 1 Section 3 MCUK990801C8
Revision 0 – 10 – Service Manual
3.9.6 Calling Line Identification
Enable * <SERVICE CODE> * # <SND>
Disable # <SERVICE CODE> * # <SND>
Temporary suppress identification # 3 1 # <TELEPHONE NUMBER> <SND>
Temporary display identification * 3 1 # <TELEPHONE NUMBER> <SND>
3.9.7 Telecommunication Services Used for Public MMI
Teleservice
Bearer Service
3.9.8 Call Divert
Set (except “No Reply” Call Bar
* * <SERVICE CODE> * <FORWARD TELEPHONE NUMBER> * <TELECOMMUNICATION SERVICE> # <SND>
Set “No Reply” Call Bar
* * <SERVICE CODE> * <FORWARD TELEPHONE NUMBER> * <TELECOMMUNICATION SERVICE> *
<TIME TO RING (seconds) # <SND>
Clear
# # <SERVICE CODE> * <TELECOMMUNICATION SERVICE> * # <SND>
Calling Line Identification Feature Service Code
Calling Line Identification Presentation (CLIP) 30
Calling Line Identification Restriction (CLIR) 31
Connected Line Presentation (CLOP) 76
Connected Line Restriction (CLOR) 77
Service MMI Service Code
All teleservices 10
Telephony 11
All data teleservices 12
Facsimile services 13
Short Message Services (SMS) 16
All teleservices except SMS 19
Voice group services 17
Service MMI Service Code
All bearer services 20
All asynchronous services 21
All synchronous services 22
All data synchronous services 24
All data asynchronous services 25
All dedicated packet access 26
All dedicated PAD access 27
Call Divert Type Service Code
Divert all calls 21
Divert calls if busy 67
Divert calls if no reply 61
Divert if not reachable 62
To Next Page
Loading...
