98
VQT3K06
VIERA Link does not
work.
(Setting on this unit)
≥ Connect with a HDMI mini cable (optional). (l 70)
≥ Set [VIERA Link] to [ON]. (l 70)
≥ Turn the unit off and then back on again.
(Setting on other devices)
≥ If the TV input does not switch automatically, switch the
input using the TV remote control.
≥ Check the VIERA Link setting on the connected device.
≥ Please refer to the operating instructions of the
connected device.
Cannot copy scenes on
the SD card by
connecting to other
equipment with the USB
cable.
≥ Other equipment might have not recognised the SD card.
Unplug the USB cable once, and reconnect it.
With other products
Problem Check points
HDC-SD40&TM40EB-VQT3K06_mst.book 98 ページ ２０１１年２月８日 火曜日 午後６時８分
To Next Page
Loading...
