To Next PageTo Next PageWhy does my Panasonic KV-S1028Y Scanner frequently have paper jams?
Frequent paper jams can occur because: * The document is wrinkled: Smooth out the document. * The rollers are dirty: Clean the rollers. * The document is not aligned correctly: Realign the document. * Too many sheets are set on the feed tray: Remove sheets until the sheets on the feed tray are under the limit mark on the document guide.
What to do if my Panasonic KV-S1028Y is not recognized by the computer?
If the computer does not recognize the scanner, consider the following: * The scanner is not connected to the computer correctly: Connect the USB cable or LAN cable correctly. * The software is not installed correctly: Uninstall the software from the computer, and then install the software again. * The scanner is connected via USB hub: Do not connect via USB hub. * There is a problem with the cable: If you are using a USB cable, be sure to use the included USB cable. If you are using a LAN cable, use a category 5 or enhanced category 5 cable or greater. * The network-related settings are incorrect: Check the network-related settings. * The unit’s power was turned off because no operations were performed for a certain period of time: Turn on the unit's power.
Why is my Panasonic KV-S1028Y scan speed so slow?
If your scan speed is slow, it might be due to: * The scanner is connected over a USB 1.1 connection. Connect over USB 2.0, USB 3.0 or USB 3.1. * When using a LAN connection, the scanning speed may be slower due to network traffic. Consult your network administrator.
What to do if the LED (Green) does not light when the Panasonic KV-S1028Y Scanner’s power is turned ON?
If the green LED doesn't light up when you turn on your Panasonic Scanner, the power cord might not be plugged in properly. Ensure the power plug is firmly inserted.
Why is my Panasonic KV-S1028Y not recognized by the computer?
There are several reasons why your Panasonic Scanner might not be recognized: - The USB cable may not be correctly connected. Ensure it is properly connected. - The software may not be installed correctly. Try uninstalling and reinstalling the software. - The scanner may be connected via a USB hub. Avoid connecting it through a USB hub. - There might be a problem with the USB cable. Use the USB cable that came with the scanner. - The scanner might have turned off due to inactivity. Press the power button to turn it back on.
How to fix a Panasonic KV-S1028Y Scanner that won't start scanning?
If your Panasonic Scanner doesn't start scanning even with a document loaded, it could be due to these reasons: - The document may not be loaded correctly. Make sure to load it properly. - The scanner's sensor might not be detecting the document because the edge is curled. Flatten the document before loading it again.
Details scanning data pushed via USB, LAN, or directly to remote destinations.
Steps to set up job lists and configurations in Image Capture Plus.
Steps for operating the scanner, selecting groups/jobs, and initiating the scan.
Steps to set up network parameters and add the scanner to the receiving computer.
Steps for operating the scanner, selecting computers/jobs, and initiating the scan.
Initial network setup and when a scan server is needed for specific destinations.
Using Configuration Web to set up output and scan parameters for presets.
Defining output destinations and specific scan parameters for presets.
Details when a scan server is needed, setup requirements, and operational notes.
Procedure for installing Scan Server software from the option CD-ROM.
Settings for paper source, size, image type, resolution, and detailed image processing.
Configuring group names, preset index, and output methods (Email, FTP, etc.).
Step-by-step guide for operating the scanner in Preset Scan mode.
Settings for Host Name, IP Address, DHCP, Subnet Mask, Gateway, DNS, and Firewall.
Settings for email accounts, server addresses, and authentication.
Settings for FTP server addresses, protocols, and accounts.
Configures SMTP settings for notifications and recipient addresses.
Fields for setting user credentials.
Requirements for password complexity, uniqueness, and secrecy.
Removing documents, opening ADF door, and identifying jam location.
Procedures for pulling jammed paper backwards or forwards.
Steps for cleaning conveyor, glasses, detectors, sensors, and rollers.
Method for cleaning with dry or damp cloths.
Method for removing dust from these critical components.
Steps to open covers and detach the double feed prevention roller.
Using roller paper to clean and reattaching the prevention rollers.
Using roller paper to clean feed rollers and securing the cover.
Cleaning remaining rollers and notes on proper installation if issues persist.
Instructions to clean other rollers, referencing Cleaning Mode.
Steps to activate Cleaning Mode and clean rollers using roller paper and the Start/Stop button.
Guidelines on replacement intervals and initial steps like power off and opening ADF.
Correctly mounting the new roller and securing the cover.
Opening cover and detaching the paper feed roller assembly.
Detaching old rubber rollers and preparing new ones.
Correctly mounting new rollers and reassembling the feed roller assembly.
Securing the cover, verifying rotation, and resetting the 'After Replace Roller Counter'.
Detailed steps for detaching the double feed prevention roller.
Taking out and preparing the new roller module.
Step-by-step instructions for setting up wired LAN parameters using the Network Setting Tool.
Accessing scanner properties and confirming the correct application for push scan events.
Step-by-step process for creating a CSR and installing a server certificate.
Steps to activate SSL/TLS and install a self-signed certificate.
Steps to save and load scanner settings using Configuration Web.
Procedure to save and load all scanner settings using Configuration Web.
Explains what settings are reset and provides notes on language selection after reset.
Solutions for LED issues, computer recognition, network settings, and slow scan speeds.
Solutions for scanner not starting or documents feeding incorrectly.
Solutions for jams related to document condition, alignment, and tray loading.
Solutions for frequent double feeding due to roller condition, detectors, or paper type.
Correcting skewed images, blank scans, vertical streaks, and density issues.
Addressing color discrepancies, noise, and moire patterns in scanned images.
Covers errors related to jams, sensors, ADF, offline status, and computer communication.
Errors related to FTP/Shared Folder paths, email limits, scan server communication, and Image Capture Plus.
General