Panasonic KV-S5046H - Cleaning the Conveyor

Cleaning the Conveyor
1. With a soft and dry cloth, wipe off any dirt on the conveyor (A).
1
2. With a soft and dry cloth, wipe off any dirt on the self-cleaning brushes (C, D) of the reference plates
(A, B).
• Push E and F in the direction indicated by the arrow to rotate the reference plate on the ADF door
side so that you can clean the brush. In the same way, push G and H in the direction indicated by the
arrow to rotate the reference plate on the main unit side to clean the brush.
5 6
7 8
3
4
1
2
Operating Manual 53
Care and Maintenance