Repacking Instructions
It is highly recommended that you keep the original carton and ALL packing materials. If you need to transport
or ship the scanner, please follow these instructions.
Note
• Improper repacking of the scanner may result in a service charge to repair the scanner.
• Please use the original carton and all of the original packing materials.
• The scanner should be handled in the correct (horizontal) position.
Required Materials
• Original scanner carton and packing materials
• Shipping tape and scissors
1. Unplug the power cord from the outlet, and remove the power cord and USB cable from the scanner.
2. Remove the exit support sheet.
3. Return the exit stoppers and exit extension tray to their original (non-extended) positions.
4. Remove the double feed prevention roller (page 64).
80 Operating Manual
Appendix
To Next Page
Loading...
