10. Push the double feed prevention roller cover until it clicks into place to close it.
Notice
• Make sure that the double feed prevention roller cover does not stick up.
If the double feed prevention roller cover is closed incompletely, damage or paper jams can occur.
11. Close the ADF door.
• Push both sides of the ADF door down slowly until it clicks into place.
12. Press the power button to turn on the unit’s power.
13. Reset the After Replace Roller Counter in User Utility to 0.
• For details, refer to the User Utility help.
66 Operating Manual
Consumables and Optional Accessories
To Next Page
Loading...
