Panasonic KV-S7097 - Cleaning the Flatbed Glass

Cleaning the Unit
42
■ Cleaning the flatbed glass
1
Turn off the scanner.
2
Fold the hopper tray in the direction of
the arrow.
3
Open the document cover.
4
Clean up the surface of flatbed glass with
the roller cleaning paper (KV-SS03) to
remove the dirt.
(Also clean up the surface of the flatbed
sheet, as required.)
5
Close the document cover and put
back the hopper tray to the original
position.
Hopper tray
Document cover
Flatbed sheet
Flatbed glass