Panasonic KX-NCP1000 - Page 204

Maintenance Console Location
3.17 [1-1] Slot—Card Property - Virtual SIP Extension
Programming Manual References
None
Feature Guide References
1.31.2 SIP (Session Initiation Protocol) Extension
SIP Location Hold Time Interval
Specifies
the interval time that the PBX waits before starting to hold information on location of SIP Extensions.
To change the value displayed here, click Common Settings and set the desired value.
Value Range
1–10 s
Maintenance Console Location
3.17 [1-1] Slot—Card Property - Virtual SIP Extension
Programming Manual References
None
Feature Guide References
1.31.2 SIP (Session Initiation Protocol) Extension
SIP Session Timer Min.
Specifies the minimum length of time that the PBX waits before disconnecting SIP sessions when no
communication is detected.
To change the value displayed here, click Common Settings and set the desired value.
Value Range
90–3600 s
Maintenance Console Location
3.17 [1-1] Slot—Card Property - Virtual SIP Extension
Programming Manual References
None
Feature Guide References
1.31.2 SIP (Session Initiation Protocol) Extension
204 PC Programming Manual
3.17 [1-1] Slot—Card Property - Virtual SIP Extension