Panasonic KX-NCP1000 - Slt-Message Waiting Lamp Pattern (Kx-Tde Series Only)

Value Range
Mode 1, Mode 2, Mode 3, Mode 4
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.13.1 Call Hold
SLT—Message Waiting Lamp Pattern (KX-TDE series only)
Specifies the Message Waiting Lamp light pattern of SLTs.
Value Range
1–12
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.19.1 Message Waiting
Whisper OHCA—for SLT / APT / KX-T72xx
Enables the use of Whisper OHCA to SLTs and IP-PTs, and DPTs other than KX-T7400 series, KX-T7500
series, KX-T7600 series, or KX-DT300 series.
Value Range
Disable, Enable
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
PC Programming Manual 579
4.18 [2-9] System Options