Panasonic KX-NCP1000 - System Wireless-Ps out of Range Timer; Svm-Recording Time

Value Range
1.5 s, 2.5 s, 3.5 s,
4.5 s
Maintenance Console Location
4.5 [2-3] Timers & Counters
Programming Manual References
None
Feature Guide References
1.5.4.7 Pause Insertion
System Wireless—PS Out of Range Timer
When the destination of an incoming call is a PS, specifies the length of time the PBX searches for the PS
before setting its status to Out of Range.
If "0" is assigned, the timer is controlled by the cell station.
Value Range
0 s, 4 s, 8 s
Maintenance Console Location
4.5 [2-3] Timers & Counters
Programming Manual References
4.18 [2-9] System Options— System Wireless—Out of Range Registration
Feature Guide References
1.30.6.1 PS Roaming by Network ICD Group
SVM—Recording Time
Specifies the maximum length of a message recorded by the SVM feature.
Value Range
1–600 s
Maintenance Console Location
4.5 [2-3] Timers & Counters
Programming Manual References
6.9 [4-1-7] Wired Extension—Simplified Voice Message
6.16 [4-2-5] Portable Station—Simplified Voice Message
PC Programming Manual 489
4.5 [2-3] Timers & Counters