Panasonic KX-NCP1000 - Co - Co Call Limitation-After Conference

CO - CO Call Limitation—After Conference
Selects
whether to allow a call between 2 outside destinations to continue after the originator of the conference
has left the conference.
Value Range
Enable: The call will be disconnected.
Disable: The call will continue.
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.14.1.2 Conference
1.30.5 QSIG Enhanced Features
Option 3
Confirmation Tone—Tone 1 : Called by Voice
Enables
the PBX to send Confirmation Tone 1. Confirmation Tone 1 is heard from a PT when it receives a call
in voice-calling mode.
Value Range
Disable, Enable
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.17.1 Doorphone Call
1.29.2 Confirmation Tone
Confirmation Tone—Tone 2 : Paged / Automatic Answer
Enables
the PBX to send Confirmation Tone 2. Confirmation Tone 2 is heard from a PT when it receives a call
in Hands-free Answerback mode, or paging.
Value Range
Disable, Enable
568 PC Programming Manual
4.18 [2-9] System Options