Panasonic KX-NCP1000 - VM Dtmf Command-Listening Message

VM DTMF Command—Recording Message
Specifies
the DTMF command the PBX sends to the VPS when a call is forwarded, intercepted, or transferred
to the VPS, so that the caller can leave a message in a certain mailbox.
Value Range
Max. 16 digits (consisting of 0–9, *, #, H [mailbox number], and P [pause])
Maintenance Console Location
5.22 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Guide References
None
VM DTMF Command—Listening Message
Specifies
the DTMF command the PBX sends to the VPS when an extension user answers a message waiting
notification from the VPS, so that the extension user can retrieve a new message in a certain mailbox without
having to dial the mailbox number manually.
Value Range
Max. 16 digits (consisting of 0–9, *, #, H [mailbox number], and P [pause])
Maintenance Console Location
5.22 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Guide References
1.19.1 Message Waiting
VM DTMF Command—Switching to AA
Specifies
the DTMF command the PBX sends to the VPS to switch from VM Service Mode to AA Service Mode.
Value Range
Max. 16 digits (consisting of 0–9, *, #, H [mailbox number], and P [pause])
Maintenance Console Location
5.22 [3-8-1] VM(DTMF) Group—System Settings
PC Programming Manual 659
5.22 [3-8-1] VM(DTMF) Group—System Settings