Panasonic KX-NCP1000 - Call Waiting-Automatic Call Waiting for Extension Call

Feature Guide References
1.8.4.4 Whisper OHCA
Call Waiting—Automatic Call Waiting for Extension Call
Selects
whether Busy Station Signalling (BSS) is automatically performed when an extension user calls a busy
extension.
Value Range
Disable, Enable
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.1.3.3 Call Waiting
Busy Out—Busy Out for Analogue CO
Enables
the PBX to automatically set a trunk to Busy Out status when a loop current is not detected, preventing
that trunk from being used.
Value Range
Disable, Enable
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.5.4.6 Trunk Busy Out
ISDN Voice Path Connection—Connect when "Alert" is sent from ISDN
Enables
the voice path of an ISDN line to connect even when an "Alert" signal is received from the telephone
company.
Value Range
Disable, Enable
580 PC Programming Manual
4.18 [2-9] System Options