Panasonic KX-NCP1000 - Pause Time

Caller ID Detection
Enables the PBX to detect a Caller ID signal from the analogue trunk.
Value Range
Disable, Enable
Maintenance Console Location
3.30 [1-1] Slot—Port Property - LCO Port
Programming Manual References
3.29 [1-1] Slot—Card Property - LCO type
Feature Guide References
1.18.1 Caller ID
Paytone Detection
Enables the PBX to receive a pay tone signal from the telephone company.
Value Range
Disable, Enable
Maintenance Console Location
3.30 [1-1] Slot—Port Property - LCO Port
Programming Manual References
None
Feature Guide References
1.26.3 Call Charge Services
Pause Time
Specifies the length of a pause.
Value Range
1.5 s, 2.5 s, 3.5 s,
4.5 s
Maintenance Console Location
3.30 [1-1] Slot—Port Property - LCO Port
Programming Manual References
None
266 PC Programming Manual
3.30 [1-1] Slot—Port Property - LCO Port