Maintenance Console Location
3.33 [1-1] Slot—Port Property - BRI Port
Programming Manual References
3.34 [1-1] Slot—Port Property - BRI Port—Connection Command
Feature Guide References
None
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS,
AOC-D, AOC-E, 3PTY
Specifies whether each ISDN or QSIG supplementary service is used.
When using the Centralised VM feature, set
CF (Rerouting) to "No".
Value Range
For COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E:
No, Yes
For 3PTY:
No, Yes-3Pty
Maintenance Console Location
3.33 [1-1] Slot—Port Property - BRI Port
Programming Manual References
None
Feature Guide References
1.21.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
1.21.1.3 Advice of Charge (AOC)
1.21.1.5 Call Forwarding (CF)—by ISDN (P-P)
1.21.1.7 Call Transfer (CT)—by ISDN
1.21.1.8 Three-party Conference (3PTY)—by ISDN
1.21.1.10 Completion of Calls to Busy Subscriber (CCBS)
1.30.4.2 Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Name
Identification Presentation (CNIP/CONP)—by QSIG
1.30.4.3 Call Forwarding (CF)—by QSIG
1.30.4.4 Call Transfer (CT)—by QSIG
1.30.4.5 Completion of Calls to Busy Subscriber (CCBS)—by QSIG
CCBS Option
Shelf (KX-TDE600 only)
Indicates the shelf position (reference only).
PC Programming Manual 305
3.33 [1-1] Slot—Port Property - BRI Port
To Next Page
Loading...
