Panasonic KX-NCP1000 - Page 312

Maintenance Console Location
3.35 [1-1] Slot—Port Property - PRI Port
Programming Manual References
3.36 [1-1] Slot—Port Property - PRI Port—Connection Command
Feature Guide References
None
Status Message
Specifies whether the Status Message is sent to the network.
Value Range
No Transmission: Status Message is not sent.
When error detection (Mandatory)
: Send the Status Message when an error (Mandatory) is detected.
When error detection (Option / Mandatory): Send the Status Message when an error (Option or Mandatory) is
detected.
Maintenance Console Location
3.35 [1-1] Slot—Port Property - PRI Port
Programming Manual References
None
Feature Guide References
None
Status Receive
Selects what happens to a call when the Status Message from the network does not match the actual status
of the call.
Value Range
Ignore: Ignore the Status Message from the network.
Disconnect: Disconnect the call.
Maintenance Console Location
3.35 [1-1] Slot—Port Property - PRI Port
Programming Manual References
None
312 PC Programming Manual
3.35 [1-1] Slot—Port Property - PRI Port