Programming Manual References
None
Feature Guide References
None
Pulse Dial—Pulse Type
Selects the type of pulse dial transmission appropriate to your area.
Value Range
Normal, Sweden
, New Zealand
Maintenance Console Location
3.37 [1-1] Slot—Card Property - T1 type
Programming Manual References
None
Feature Guide References
None
Pulse Dial—Pulse Inter-digit Pause
Specifies
the length of the pulse inter-digit pause. This allows the telephone company to have enough time to
accept the dialled digits correctly.
Value Range
630 ms, 830 ms, 1030 ms
Maintenance Console Location
3.37 [1-1] Slot—Card Property - T1 type
Programming Manual References
None
Feature Guide References
None
Pulse Dial—CO Feed Back Tone
Specifies whether the pulse feedback tone is turned on or not. For outgoing trunk calls, audible tones can be
heard as the dialled number is sent out, which informs the extension user that the number has been dialled.
338 PC Programming Manual
3.37 [1-1] Slot—Card Property - T1 type
To Next Page
Loading...
