EasyManua.ls Logo

Panasonic KX-NCP1000 - Page 433

Panasonic KX-NCP1000
1016 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Value Range
0.0.0.0–223.255.255.255
Maintenance Console Location
3.55 [1-1] Slot—Card Property - IP Extension (KX-TDE series only)
Programming Manual References
3.56 [1-1] Slot—Card Property - IP Extension—Common Settings (KX-TDE series only)
Feature Guide References
1.31.1 IP Proprietary Telephone (IP-PT)
Keep Alive Time Out
Specifies the length of time that the PBX will continue to consider an IP-PT to be active even if it receives no
transmissions from that IP-PT. The PBX constantly confirms the status of IP-PTs. If no communications are
received from an IP-PT for the duration specified here, the PBX considers the IP-PT to be unreachable, and
sets the port status to Fault.
During
operation, set between 10 s and 60 s. Settings over 60 s, and Disable, are used for debugging purposes,
and IP-PTs cannot be guaranteed to function normally in these circumstances. Do not use debugging settings
unless instructed to do so.
Value Range
Disable, 10–120 s
Maintenance Console Location
3.55 [1-1] Slot—Card Property - IP Extension (KX-TDE series only)
Programming Manual References
None
Feature Guide References
1.31.1 IP Proprietary Telephone (IP-PT)
Echo Canceller Ability
Specifies the echo canceller ability time.
Value Range
OFF, 48 ms, 128 ms
Maintenance Console Location
3.55 [1-1] Slot—Card Property - IP Extension (KX-TDE series only)
PC Programming Manual 433
3.55 [1-1] Slot—Card Property - IP Extension (KX-TDE series only)

Table of Contents

Other manuals for Panasonic KX-NCP1000

Related product manuals